6003C3BNLM Nachi Bearing Open C3 Japan 17x35x10mm Manager of Craft Farms Property Owners Association accused of stealing. 6003C3BNLM Nachi Bearing 17mm x 35mm x 10mm Made in Japan 6003C3BNLM Nachi Bearing, Made in Japan, here are the dimensions of the 6003C3BNLM, the 6003C3BNLM inner diameter is 17mm, the 6003C3BNLM outer diameter is 35mm and the 6003C3BNLM width is 10mm. 6003C3BNLM Nachi Ball Bearing Nachi Deep groove Ball Bearing Radial Clearance: C3 Dimensions: 17mm x 35mm x 10mm Metric ID (inner diameter) Bore: 17mm OD (outer diameter): 35mm Width: 10mm Size: 17 x 35 x 10 mm Quantity: 1 Bearing Dynamic load rating Cr: 6,000 N Static load rating Cor: 3,250 N Limiting Speed: Grease Lubrication: 22,000 RPM Oil Lubrication: 26,000 RPM Made in Japan Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a widevariety of seal, shield and snap ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make pointcontact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as theouter ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, thisbearing type can be produced to provide both high running accuracy and high speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known asExtra small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating atvery high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease inadvance.